• Vacuum Welding Tungsten Carbide plate as wear parts
  • Vacuum Welding Tungsten Carbide plate as wear parts
  • Vacuum Welding Tungsten Carbide plate as wear parts
  • Vacuum Welding Tungsten Carbide plate as wear parts

Vacuum Welding Tungsten Carbide plate as wear parts

Various OEM

After years of researching, we gathered a good knowledge of welding carbide to steel, using Vacuum Welding, High Frequency Brazing and some other welding technologies. For all welding process, there’s a big probe for releasing the inner stress of the wear parts. Our engineers summarized a very useful method to fix out this problem, and it’s the key point to keep our wear parts satisfying our clients continuously. Our wear parts are widely used in many different industries, such as mining, cement, coal, agriculture, forest, oil, gas and also other areas.

1, Superb quality tungsten carbide with different grades
2, Different grade of steel is available.
3, Advanced welding/brazing technology
4, Available heat-treated/ hardened and tempered
5, Extreme durable to ensure a longer lifetime.
6, Can OEM logo and packing for your special request.
7, Quality guarantee for 12 months.


 RECOMMEND GRADES AND SPECIFICATIONS:

Grade Equal to ISO Category Number Performance Performance&application recommended
Density G/Cm 3 Bend Strength N/mm 2 Hardness HRA
YG3 K01 14.9-15.3 ≥1180 ≥90.5  Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n
YG3X K01 15.1-15.4 ≥1300 ≥91.5
YK05   14.95 2500 90.5 Mostly used as the buttons of small and bits medium sized percussion
YG8C   14.8 2400 88.5 and as the inserts of rotary prospecting bits to cut soft and 
medium hard formations.
YG6   14.95 1900 90.5 For coring crowns,electric coal drill bits, coal cutting picks,oil 
cone bits and scraping knife bits,used in coal geological prospecting,
mining and oil well boring.
YG6X K10 14.8-15.1 ≥1560 ≥91.0 Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6A K10 14.7-15.1 ≥1580 ≥91.0
YG6 K20 14.7-15.1 ≥1670 ≥89.5 Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. 
YG8 K30 14.6-14.9 ≥1840 ≥89 Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.
YG10X   14.5 2400 91.5 Fine grain alloy, good wear resistance,Used for processing hard 
wood, veneer board,PCB,PVC and metals.
YG11   14.4 2600 88.5 Forming or stamping dies for metal powders and nonmental powders.
YG11C K40 14.4 2700 86.5 Largely for the inserts and buttons of percussion bits and tricone bits to cut medium 
hard, hard and very hard formations.
YG15 K40 14 2800 87.5 For fabricating drawing dies of steel tubesand rods under high 
compressibility ratio;punching,stamping,forging tools under large stress.
YG15C   14 3000 85.5 For oil cone dril bits, for medium soft and medium-hard rocks.
YG16C   13.9 2900 85.5 Impact resistance, hot&forging dies etc.
YGH40   13.5-13.9 ≥2450 ≥83.0 Mainly for making hot dies.
YG20   13.5 3200 85.5 For fabricating of stamping dies for watch parts, spring plates of musical
          instruments, battery jars,small sized steel balls,screws,screw caps.
YG18C   13.7 3100 84.5 Impact resistance forging dies,hot-press forging dies and rollers.
YG20C   13.5 3300 83.5 Dies for wear resistant or impact resistant application.
YG22C   13.3 3500 83 Nut forming dies and high impact resistance forging dies.
YG25C   13.1 3600 82.5 Stainless bolt header dies and rollers. 
YT15 P10 11.1-11.6 ≥1180 ≥91.0 Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel.
YT14 P20 11.2-11.8 ≥1270 ≥90.5 Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting.
YT5 P30 12.5-13.2 ≥1430 ≥89.5 Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting.

Zhuzhou Hongtong's wear parts are widely used in many different industries, such as mining, cement, coal, agriculture, forest, oil, gas and also other areas.
You can talk to us for any request and we will give you a best wear solution!

Related Products

As a professional tungsten carbide manufacturer from China, with more than 20 years’ experience, we have skilled engineers and technical know-how, to meet any of your carbide request.

Contact Details


MAIL US ATarris@zzhthj.com
CALL US ON:+86 731 28487117
ADDRESS:No.86,Mingri Rd,Tianyuan Dist,Zhuzhou,Hunan,China 412007