 | ZHUZHOU HONGTONG TUNGSTEN CARBIDE CO.,LTD |
| ZHUZHOU HONGTONG TUNGSTEN CARBIDE CO.,LTD |
Tungsten carbide dies are a wise economical choice for steel wire and other large-size wire drawing applications that make cost savings a priority over die wear resistance and wire surface finish.
We strictly focus on the top-quality raw material in the manufacturing of our superlative products. Additionally, the inexplicable Performance, Quality, & Quick Service has also attracted customers from every corner of the world to place regular orders for these Wire Drawing Dies. Advantages of our Product: Significantly Longer die life Excellent wear resistance High surface finish Accurately sized High machine efficiency Repeatability
Hole sizes from 0.150mm to 50mm
Advantages:
Excellent corrosive wear resistance
Available in a large range of sizes
Very cost-effective production
Application:
Ideal for most ferrous wires, large diameters and applications where corrosive wear is the primary cause of die failure.
typically for Carbon steel wire of all sizes, tire cord and welding wire.
| Grade No. |
Density (g/cm3) |
HRA |
T.R.S (Mpa) |
Application |
| YG3X | 14.9 | ≥91.5 | ≥1300 | For drawing non-ferrous metal wire and stainless-steel wire etc. |
| YG6 | 14.8 | ≥90.0 | ≥2150 | For drawing steel wire and stainless-steel wire etc. |
| YG6X | 14.8 | ≥92.0 | ≥1860 | For drawing nonferrous metal wire, steel wire, stainless steel wire. Good wear resistance and high toughness. |
| YG8 | 14.8 | ≥89.5 | ≥2320 | For drawing steel wire, stainless steel wire. Good general performance. |
| YG11 | 14.4 | ≥88.5 | ≥2420 |
For fabricating drawing dies of steel tubes and rods under high compressibility ratio; punching, stamping, forging tools under large stress. |
1. Tungsten carbide with high hardness, high wear resistance and high red hardness, at 550℃ still maintain more than 56HRC hardness.
2. Has a high modulus of elasticity, generally is (4~7)×104kg / mm2, and excellent rigidity at room temperature.
3. Have a high compressive strength which is greater than 6000MPa.
4. Have good resistance to oxidation and corrosion resistance, acid resistance, alkali resistance and high temperature not easily oxidized.
5. Has a low coefficient of thermal expansion, suitable for manufacturing high, precision, sharp die.
 | ZHUZHOU HONGTONG TUNGSTEN CARBIDE CO.,LTD |
As a professional tungsten carbide manufacturer from China, with more than 20 years’ experience, we have skilled engineers and technical know-how, to meet any of your carbide request.
